[Default GPS]
GPS=RMC_GGA
GPS1=GGA_VTG
GPS2=RMC_GGA

[RMC_GGA]
Type=NMEA
Name=GPS with RMC and GGA and messages
Device=SerialPort
Input1=GPRMC,utctime,,latitude,ns,longitude,ew,speed,course,,,,,
Input2=GPGGA,,,,,,quality,satellites,hdop,,,,,,
speedMultiplier=1.851998
speedOffset=0.0

[GGA_VTG]
Type=NMEA
Name=GPS with GGA and VTG and messages
Device=SerialPort
Input1=GPGGA,utctime,latitude,ns,longitude,ew,quality,satellites,hdop,,,,,,
Input2=GPVTG,course,,,,,,speed,

[SerialPort]
Port=1
Timeout=5
Baud Rate=4800
Byte size=8
Parity=N
StopBits=1
Binary mode, no EOF check=0
Enable parity checking=0
CTS output flow control=0
DSR output flow control=0
DTR flow control type=handshake
DSR sensitivity=0
Enable error replacement=0
Enable null stripping=0
RTS flow control=handshake
Abort reads/writes on error=0
XOFF continues Tx=0
XON/XOFF out flow control=0
XON/XOFF in flow control=0
Transmit XON threshold=0
Transmit XOFF threshold=0
Tx and Rx XON character=0
Tx and Rx XOFF character=0
Error replacement character=0
End of input character=0
Received event character=0

[SerialPort Detection]
PortCount=6
TestCount=3
Defaults=SerialPort

[SerialPort Try1]
Baud Rate=4800

[SerialPort Try2]
Baud Rate=19200

[SerialPort Try3]
Baud Rate=9600